UPS Systems Sales Repairs by SINETECH

DP1000 SERIES
High Frequency Online Double Conversion Sinewave

4KVA - 10KVA
Single Phase

The DP1000 UPS uses true on-line double conversion technology, thus ensuring that its load receives the best quality power under all mains conditions. The DP1000 uses a micro processor controlled, single phase thyristor rectifier. The flexible charging characteristic of the rectifier makes the DP1000 the ideal choice in the case of battery backup times exceeding 10 minutes.

The DP1000 uses micro processor control, to recreate the perfect sine wave for your loads. The pulse inverter will protect the UPS's Loads from all types of mains conditions that will damage critical loads. THE DP1000 is supplied standard with a thyristor static bypass switch and manual bypass. The DP1000 is fitted standard with a front panel mimic. An optional LCD display can be fitted. The DP1000 can be fitted with a potential free contact card for BMS interface or remote status monitoring.

Features include :

Easy installation and integration

Batteries fitted internally or externally

High reliability IGBT inverter using PWM to create the perfect sinewave for the load, with high overload capabilities

Mechanical and electronic protection of all components

Intelligent network interfacing and shutdown software capabilities

SNMP, GSM/SMS AND BMS interface capabilities

High performance and reliability

Full static and manual bypass

Wide input voltage range

FRONT VIEW
DP1000 UPS

REAR VIEW

TECHNICAL SPECIFICATIONS

MODEL DP1004-11 DP1005-11 DP1006-11 DP1008-11 DP1010-11

Output Phase 1 phase, 2 wire + earth, 0,8 lag pf rated, sinewave

VA Rating 4KVA 5KVA 6KVA 8KVA 10KVA

KW Rating 3,2KW 4KW 4,8KW 6,4KW 8KW

Output current at rated VA load 18A 23A 28A 36A 45A

Voltage 220/230VAC - Other voltages on request

Static Regulation ±1%

Dynamic Regulation ±5% (100% load step) Recovery to 2% within 20ms)

Frequency : Free Running
Synch to Mains 50Hz ± 0.01%
48.5 - 51.5Hz adjustable, other frequencies on request

Total Harmonic Distortion < 3% for linear loads, < 5% for non linear loads

Overload Capacity 105% continuous / 110% 60 min. / 125% 1 min. / 150% 25 sec.

Crest Factor > 3:1 @ rated inverter load

Efficiency AC-AC 90% @ full load and rated voltage

Efficiency inverter 92% @ full load

Output transformer Double wound for galvanic isolation

Output protection Electronic and circuit breaker/fuses

Input Voltage 220/230VAC 1 Phase
2 Wire + E, other voltages on request

Frequency 50/60Hz ± %5, other frequencies on request

Voltage Range 220 volts -10% to +15% before going onto battery

DC Link and Battery Voltage Nominal voltage 192V, Float charge 216V,
Shutdown voltage 157V, all voltages adjustable on the machine

Maximum DC charge current 8 amps adjustable

Ripple Voltage Less than 1%

Internal Batteries 12V/7Ah Yes No

Internal Batteries 12V/12Ah Yes No

Battery types available 3-5yr low maintenance, 3-5 and 10yr VRLA, all types of vented lead acid and nickel cadmium

Number of lead acid cells 96 cells

Oscillator Crystal Internal to microprocessor

Static Bypass Switch Type Thyristor bridge

Rated Current 1.5 In

Overload Capacity 150% Continuous 200% 1 Min. 1000% 10ms.

Environmental Temperature 0 - 40 deg. Celsius, 15 - 25 deg. recommended, 0 - 35 deg. continuous

Humidity 0 - 90% non condensing

Maxium altitude without derating 0 - 2000 meters

Cabinet colour RAL7032 interior

Heat generation at full load 520 watts 650 watts 780 watts 1040 watts 1300 watts

Recommended supply CB 30A 1P 30A 1P 45A 1P 63A 1P 63A 1P

Dimensions UPS (w x h x d)
Battery box type 1P
Battery box type 3P 350 x 860 x 760mm
350 x 860 x 760mm
540 x 930 x 760mm

Noise Level dBA < 50

Optional Items RS232, GSM, LCD display, Voltage free contacts, Shutdown and monitoring software

Other

Degree of protection IP21

Warranty 12 months

	High Frequency Double Conversion True Online Pure Sinewave UPS Systems
	Home \| Products \| Email \| Contact Details \| Profile \| Lightning Information Tel: (++27) 11 886-7874 Fax : (++27) 11 787-0178

MODEL		DP1004-11	DP1005-11	DP1006-11	DP1008-11	DP1010-11
Output	Phase	1 phase, 2 wire + earth, 0,8 lag pf rated, sinewave
	VA Rating	4KVA	5KVA	6KVA	8KVA	10KVA
	KW Rating	3,2KW	4KW	4,8KW	6,4KW	8KW
	Output current at rated VA load	18A	23A	28A	36A	45A
	Voltage	220/230VAC - Other voltages on request
	Static Regulation	±1%
	Dynamic Regulation	±5% (100% load step) Recovery to 2% within 20ms)
	Frequency : Free Running Synch to Mains	50Hz ± 0.01% 48.5 - 51.5Hz adjustable, other frequencies on request
	Total Harmonic Distortion	< 3% for linear loads, < 5% for non linear loads
	Overload Capacity	105% continuous / 110% 60 min. / 125% 1 min. / 150% 25 sec.
	Crest Factor	> 3:1 @ rated inverter load
	Efficiency AC-AC	90% @ full load and rated voltage
	Efficiency inverter	92% @ full load
	Output transformer	Double wound for galvanic isolation
	Output protection	Electronic and circuit breaker/fuses
Input	Voltage	220/230VAC 1 Phase 2 Wire + E, other voltages on request
	Frequency	50/60Hz ± %5, other frequencies on request
	Voltage Range	220 volts -10% to +15% before going onto battery
DC Link and Battery	Voltage	Nominal voltage 192V, Float charge 216V, Shutdown voltage 157V, all voltages adjustable on the machine
	Maximum DC charge current	8 amps adjustable
	Ripple Voltage	Less than 1%
	Internal Batteries 12V/7Ah	Yes			No
	Internal Batteries 12V/12Ah	Yes			No
	Battery types available	3-5yr low maintenance, 3-5 and 10yr VRLA, all types of vented lead acid and nickel cadmium
	Number of lead acid cells	96 cells
Oscillator	Crystal	Internal to microprocessor
Static Bypass Switch	Type	Thyristor bridge
	Rated Current	1.5 In
	Overload Capacity	150% Continuous 200% 1 Min. 1000% 10ms.
Environmental	Temperature	0 - 40 deg. Celsius, 15 - 25 deg. recommended, 0 - 35 deg. continuous
	Humidity	0 - 90% non condensing
	Maxium altitude without derating	0 - 2000 meters
	Cabinet colour	RAL7032 interior
	Heat generation at full load	520 watts	650 watts	780 watts	1040 watts	1300 watts
	Recommended supply CB	30A 1P	30A 1P	45A 1P	63A 1P	63A 1P
Dimensions	UPS (w x h x d) Battery box type 1P Battery box type 3P	350 x 860 x 760mm 350 x 860 x 760mm 540 x 930 x 760mm
Noise Level	dBA	< 50
Optional Items		RS232, GSM, LCD display, Voltage free contacts, Shutdown and monitoring software
Other
Degree of protection		IP21
Warranty		12 months