UPS Systems Sales Repairs by SINETECH

DP2000 SERIES
High Frequency Online Double Conversion Sinewave

10KVA - 30KVA
Three Phase In/ Single Phase Out

The DP2000 uses true on-line double conversion technology and in conjunction with its flexibility provides advanced power protection for mission critical applications under all types of supply conditions.

The DP2000 is supplied standard for a single input configuration. It is however possible to increase power reliability by installing the DP2000 with a split bypass configuration. To further improve redundancy a hot stand-by configuration can be used whereby one UPS backs up another UPS.

THE DP2000 is supplied standard with a single phase thyristor static bypass switch and a manual bypass. The DP2000 can be supplied with an isolation transformer in a separate cabinet.The DP 2000 is fitted standard with a front panel mimic. An optional LCD display can be fitted. The front panel mimic gives real time status at a glance, while the LCD display allows diagnostics of the UPS. The DP2000 can be fitted with a potential free contact card for BMS interface or remote status monitoring.

Features include :

All boards use standard components, thus making repairs easy and inexpensive, while the micro processor control ensures the smallest possible cabinet size

Low peak currents draw from the supply due to the three phase rectifier

An adjustable synchronisation window ensures trouble free performance when running with a diesel generator where the frequency will drift around

An adjustable slew rate also assists with running on diesel generator

SNMP, GSM/SMS AND MOD BUS ,PROFI BUS and BMS interface capabilities

Low maintenance and running costs

Capable of running at 50 or 60Hz

Can be supplied for a wide range of input and output voltages

FRONT VIEW
DP2000 UPS

REAR VIEW

TECHNICAL SPECIFICATIONS

MODEL DP2010-31 DP2015-31 DP2020-31 DP2025-31 DP2030-31

Output Phase 1 phase, 2 wire + earth, 0,8 pf rated, sinewave

VA Rating 10KVA 15KVA 20KVA 25KVA 30KVA

KW Rating 8KW 12KW 16KW 20KW 24KW

Output current at rated VA load 45A 68A 91A 111A 133A

Voltage 220/230VAC - Other voltages on request

Static Regulation ±1%

Dynamic Regulation ±5% (100% load step) Recovery to 2% within 20ms)

Frequency : Free Running
Synch to Mains 50Hz ± 0.02%
48.5 - 51.5Hz adjustable, other frequencies on request

Total Harmonic Distortion < 3% for linear loads, < 5% for non linear loads

Overload Capacity 105% continuous / 110% 60 min. / 125% 1 min. / 150% 25 sec.

Crest Factor > 3:1 @ rated inverter load

Efficiency AC-AC 90% @ full load and rated voltage

Efficiency inverter 92% @ full load

Output transformer Double wound for galvanic isolation

Output protection Electronic and circuit breaker/fuses

Input Voltage 380/400VAC 3 Phase
4 Wire + E, other voltages on request

Frequency 50/60Hz ± %5, other frequencies on request

Voltage Range 380/400 volts -10% to +15%

DC Link and Battery Voltage Nominal voltage 360V, Float charge 405V,
Shutdown voltage 295V, all voltages adjustable on the machine

Maximum DC charge current 10 amps adjustable

Ripple Voltage Less than 1%

Internal Batteries 12V/7Ah Yes No No No No

Internal Batteries 12V/12Ah Yes No No No No

Battery types available 3-5yr low maintenance, 3-5 and 10yr VRLA, all types of vented lead acid and nickel cadmium

Number of lead acid cells 180 cells

Oscillator Crystal Internal to microprocessor

Static Bypass Switch Type Thyristor bridge

Rated Current 1.5 In

Overload Capacity 150% Continuous 200% 1 Min. 1000% 10ms.

Environmental Temperature 0 - 40 deg. Celsius, 15 - 25 deg. recommended, 0 - 35 deg. continuous

Humidity 0 - 90% non condensing

Maxium altitude without derating 0 - 2000 meters

Cabinet colour RAL7032 interior

Heat generation at full load 1100 watts 1650 watts 2200 watts 2500 watts 3000 watts

Recommended supply CB 60A 3P 80A 3P 100A 3P 125A 3P 160A 3P

Recommended supply cable for bypass and rectifier from 1 feeder 10mm²
4W + E 16mm²
4W + E 25mm²
4W + E 25mm²
4W + E 35mm²
4W + E

Recommended output CB 60A 1P 80A 1P 100A 1P 125A 1P 160A 1P

Recommended supply cable for bypass and rectifier from 1 feeder 10mm²
2W + E 16mm²
2W + E 25mm²
2W + E 25mm²
2W + E 35mm²
2W + E

Dimensions UPS (w x h x d)
Battery box type 1P
Battery box type 3P 540 x 930 x 760mm
350 x 860 x 760mm
540 x 930 x 760mm 700 x 800 x 1600mm

Noise Level dBA < 55

Optional Items RS232, GSM, LCD display, Voltage free contacts, Shutdown and monitoring software

Other

Degree of protection IP21

Split bypass operation Yes

Warranty 12 months

	High Frequency Double Conversion True Online Pure Sinewave UPS Systems
	Home \| Products \| Email \| Contact Details \| Profile \| Lightning Information Tel: (++27) 11 886-7874 Fax : (++27) 11 787-0178

MODEL		DP2010-31	DP2015-31	DP2020-31	DP2025-31	DP2030-31
Output	Phase	1 phase, 2 wire + earth, 0,8 pf rated, sinewave
	VA Rating	10KVA	15KVA	20KVA	25KVA	30KVA
	KW Rating	8KW	12KW	16KW	20KW	24KW
	Output current at rated VA load	45A	68A	91A	111A	133A
	Voltage	220/230VAC - Other voltages on request
	Static Regulation	±1%
	Dynamic Regulation	±5% (100% load step) Recovery to 2% within 20ms)
	Frequency : Free Running Synch to Mains	50Hz ± 0.02% 48.5 - 51.5Hz adjustable, other frequencies on request
	Total Harmonic Distortion	< 3% for linear loads, < 5% for non linear loads
	Overload Capacity	105% continuous / 110% 60 min. / 125% 1 min. / 150% 25 sec.
	Crest Factor	> 3:1 @ rated inverter load
	Efficiency AC-AC	90% @ full load and rated voltage
	Efficiency inverter	92% @ full load
	Output transformer	Double wound for galvanic isolation
	Output protection	Electronic and circuit breaker/fuses
Input	Voltage	380/400VAC 3 Phase 4 Wire + E, other voltages on request
	Frequency	50/60Hz ± %5, other frequencies on request
	Voltage Range	380/400 volts -10% to +15%
DC Link and Battery	Voltage	Nominal voltage 360V, Float charge 405V, Shutdown voltage 295V, all voltages adjustable on the machine
	Maximum DC charge current	10 amps adjustable
	Ripple Voltage	Less than 1%
	Internal Batteries 12V/7Ah	Yes	No	No	No	No
	Internal Batteries 12V/12Ah	Yes	No	No	No	No
	Battery types available	3-5yr low maintenance, 3-5 and 10yr VRLA, all types of vented lead acid and nickel cadmium
	Number of lead acid cells	180 cells
Oscillator	Crystal	Internal to microprocessor
Static Bypass Switch	Type	Thyristor bridge
	Rated Current	1.5 In
	Overload Capacity	150% Continuous 200% 1 Min. 1000% 10ms.
Environmental	Temperature	0 - 40 deg. Celsius, 15 - 25 deg. recommended, 0 - 35 deg. continuous
	Humidity	0 - 90% non condensing
	Maxium altitude without derating	0 - 2000 meters
	Cabinet colour	RAL7032 interior
	Heat generation at full load	1100 watts	1650 watts	2200 watts	2500 watts	3000 watts
	Recommended supply CB	60A 3P	80A 3P	100A 3P	125A 3P	160A 3P
	Recommended supply cable for bypass and rectifier from 1 feeder	10mm² 4W + E	16mm² 4W + E	25mm² 4W + E	25mm² 4W + E	35mm² 4W + E
	Recommended output CB	60A 1P	80A 1P	100A 1P	125A 1P	160A 1P
	Recommended supply cable for bypass and rectifier from 1 feeder	10mm² 2W + E	16mm² 2W + E	25mm² 2W + E	25mm² 2W + E	35mm² 2W + E
Dimensions	UPS (w x h x d) Battery box type 1P Battery box type 3P	540 x 930 x 760mm 350 x 860 x 760mm 540 x 930 x 760mm				700 x 800 x 1600mm
Noise Level	dBA	< 55
Optional Items		RS232, GSM, LCD display, Voltage free contacts, Shutdown and monitoring software
Other
Degree of protection		IP21
Split bypass operation		Yes
Warranty		12 months