Energy-efficient power protection for business computers

With an efficient electrical design and the EcoControl function (USB models), which automatically disables peripherals when the master device is turned off, the Eaton Ellipse ECO helps you make energy savings of up to 25 per cent compared to previous-generation UPSs.
• As well as providing a power supply backed up by a battery to keep equipment operating during a power failure, the Ellipse ECO also provides effective protection against damaging surges.
• The Ellipse ECO includes a high performance surge-protection device that complies with IEC 61643-1; this device also protects data connections such as Ethernet, internet and telephone lines.

• The Ellipse ECO comes with either four (500/650/800 models) or eight outlets (1200/1600 models) with Schuko (DIN) or French (FR) format for easy connection to typical computer configurations with peripherals. IEC models are also available.
• The Ellipse ECO’s extra-flat design makes it easy to install in any office environment: installation options include vertical box format, below the desk, horizontally under a monitor, 19” rack-mounted (optional 2U kit) and wall-mounted (optional kit).
• The USB models are designed to be compatible with a wide variety of different computer models. Eaton power management software is delivered as standard (CD and USB cable supplied) and is compatible with all major operating systems (Windows 7, Vista, XP, Linux and Mac OS). Complete peace of mind
• Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Easy-to-replace battery helps to extend UPS service life.
• Push-button circuit breaker enables easy recovery from an overload or short circuit.

Print Version (288kb)

Eaton® Nova AVR® UPS systems provide the user with cost-effective, rugged protection against electrical interference and power outages.

• Line-interactive technology (automatic voltage regulation via buck and boost)
• Wide tolerance to fluctuations in the power supply (89–151V)
• Data line filtering for total protection
• The Nova AVR is equipped with protection for data lines to prevent surges and the destruction of sensitive electronic components

• Three indicator lamps to display the principal states (On/Off, Replace Batteries, Fault), supplemented by audible alarms
• The batteries are easy to replace
• The cold start function can turn the Nova AVR into a mobile power source for IT equipment

• The Nova AVR can be remotely monitored over the network from a simple Web browser or an enterprise SNMP platform at no extra cost

Print Version (219kb)

Power protection for workstations and small servers

Availability

• Line Interactive technology: Eaton Ellipse MAX provides effective protection, even in disturbed electrical environments. Fluctuations in voltage are automatically corrected by an AVR device (booster/fader), without using the batteries.UPS systems not only provide a battery backed up supply to keep equipment operating when there is a power cut but also provide effective protection against
• Surge protection: Eaton Ellipse MAX includes a high performance surge protective device which complies with IEC 616431 standard
• Robust: A wide tolerance of input voltage avoids excessively frequent changeover to battery power. This means that maximum capacity is always available. The thresholds for changeover to battery power can be adjusted using the supplied Solution-Pac software

• Easy installation: Eaton Ellipse MAX USBS models are supplied with power management software & communication cables
• Unlimited warranty: Eaton Ellipse MAX provides a warranty of connected computer equipment for an unlimited amount

• Connection: 4 or 8 standard outlets for each country (FR, DIN or UNIversal), IEC version also available
• Integration: Eaton Ellipse MAX can be installed in vertical position over & under the desk, or horizontally under a monitor
• Rackable: the optional 2U kit allows you to install the Eaton Ellipse MAX in a 19” rack
• Power management: the USBS models feature a combined USB and serial port

Print Version (465kb)

Manageability

• The new graphical LCD display provides clear information on the UPS’s status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys.
• For the first time in the industry the 5PX can meter energy consumption right down to the managed outlet groups. kWh values can be monitored using the LCD or Eaton’s Intelligent Power® Software Suite.
• Load segment control enables prioritised shutdowns of nonessential equipment to maximise battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.
• The 5PX offers Serial and USB connectivity, plus an extra slot for an optional communication card (including SNMP/ Web card or relay contact card). Eaton’s Intelligent Power® Software Suite compatible with all major OS including virtualization software such as VMware and Hyper-V is included with each UPS.

• With an optimised electrical design, the 5PX can provide up to 99% efficiency, reducing cooling and utility costs.
• With a power factor of 0.9, the 5PX delivers more real output power. It powers more servers than other UPSs with equivalent VA ratings and lower power factors. The 5PX is compatible with all modern IT equipment.
• When operating in battery mode the 5PX provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

• The 5PX is available in a rack/tower convertible version - pedestal and rail kits are included with all models at no extra charge.
• Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging technique that only recharges the battery when necessary, so the battery experiences less corrosion and service life is prolonged by up to 50%.
• Batteries can be hot-swapped without ever having to shut down connected equipment. With an optional, hot-swap maintenance bypass module, you can even replace the entire UPS.
• There is also the possibility to add more runtime with up to four external hot-swappable battery modules, able to run systems for hours if necessary. The additional battery modules are automatically recognised by the UPS.

Print Version (151kb)

1500VA

3000VA

Maximum availability

• Topology: double conversion on-line UPS with automatic by-pass and power factor correction
• Powershare: the Eaton EX output sockets are individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard
• Continuous power supply: Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the UPS to be replaced without interrupting the power supply
• Long backup times: 1 to 4 EXB battery units can be added to the Eaton EX. The Eaton EX 3000XL has a built-in super charger for extra long backup times

• Easy operation: the LCD gives you access to a wide range of measurements and set-up menus
• Remote supervision: the Eaton software suite offers a wide range of communication option including: SNMP and HTML, ModBus/JBus and relay outputs

• Format: EX 700 to 1500 are available in tower format or RT2U convertible rack/tower format (compatible with short-depth rack). EX 2200 & 3000 are available in RT2U format (optimised for rack mounting) or RT3U (for tower or short-depth racks)
• Connections: with FlexPDU and HotSwap MBP, the RT2U and RT3U models can be connected by sockets or terminal blocks. They can be installed as required, on the side or on top of the unit
• Compatible with high power factor loads: Eaton EX is rated for 0.9 power factor (700 VA/630 W, 1000 VA/900 W, 1500 VA/1350 W, 2200 VA/1980 W and 3000 VA/2700 W)
• Communication: the EX includes both serial and USB ports, plus remote On/Off connector and an extra slot for optional communication cards. The UPS comes with a complete Eaton software suite.

Print Version (151kb)

• Two front access hot-swappables sub-modules (power and battery) for maintenance without load interruption
• Automatic battery test (test period can be set)
• Internal bypass built-in to supply the load even if the UPS fails
• Large input voltage and frequency ranges to avoid using the batteries unnecessarily

• Can be used as a free-standing tower unit or 19” rack-mounted: only 3U for Eaton MX 4000 and 5000, 16U for Eaton MX Frame
• LCD multilingual display with mimic and LEDs for rapid view of the UPS status, diagnostics and event log
• Outputs: IEC 10A and 16A outlet sockets and hardwired outputs
• Built-in Powershare system for remote reboot of the equipment connected, sequential start-up or load shedding while operating from battery to maintain the power to critical loads
• Eaton MX Frame is compatible with three phase or single phase supplies
• Backup time: 10 mins up to 2 hours by adding 3U battery extension modules
• More power with an output power factor of 0.9
• When the power supply needs to be upgraded, the Eaton MX 4000 and 5000 can be paralleled to provide 8 kVA or 10 kVA using the ModularEasy kit: without extra cost on the initial purchase
• Eaton MX Frame is a modular system with 5 kVA sub-modules paralleled to provide up to 20 kVA or 15 kVA with redundancy

Print Version (149kb)

Maximum availability

• Hot swappable UPS and battery modules
• Internal bypass and maintenance bypass included as standard
• The UPS can be connected to two independent electrical sources (sources 1 and 2 can be common or separate)
• Large input voltage range without draining the battery: 230 V + 20% to - 30% single phase and 400 V + 15% to - 20% three phase
• Batteries tested automatically at regular intervals and protected against deep discharge
• N+1 redundancy supported by two single units

• From 10 minutes to 2 hours with battery modules or up to 8 hours using the CLA charger module
• Automatic recognition of battery modules and easy battery installation with battery integration system

• Multilingual LCD display and LEDs for rapid view of the UPS status and the operating log
• Self diagnosis and fault messages

Computer

• Tower / 6U Rack convertible
• Comprehensive range of Power Distribution Units for convenient power distribution within the rack

• Compatible with all types of generator set
• Can be integrated into building management systems
• Steel casing
• Operating temperature up to 45° C
• Meets Marine vibration test requirements

Print Version (146kb)

POWER MANAGEMENT
• Solution-Pac 2 software on CD
  Server protection and local or remote UPS management
• Management-Pac 2 software suite on CD
  • Enterprise Power Management Device Monitoring/Management Application
  • NMS integration kit : HP OpenView, IBM Tivoli Netview, CA Unicenter

  COMMUNICATION CARDS
  for Evolution and Pulsar EX RT

  • Network Management Card
  • Status/AS400 card

  AND for Comet EX RT