OMNIPOWER HT-E Series
150W - 1500W / 12V or 24V

OMNIPOWER HT-P Series
1200W - 3000W / 12V or 24V with LED power & battery voltage indicators

POWERMASTER A Series
150W - 2500W / 12V or 24V

MODIFIED SINEWAVE WITH BUILT-IN CHARGER & TRANSFER SWITCH
Acts like a simple back-up system
for Camping & Hobby applications

OMNIPOWER HT-B-M1000 Series
1000W / 12V with 10A charger

POWERMASTER CA Series
600W - 2500W / 12V or 24V

COTEK Series
150W - 3000W / 12V, 24V or 48V

OMNIPOWER HT-S Series
150W - 1200W / 12V, 24V or 48V

OMNIPOWER FARMER 5036 Series
5KVA / 36V

KACO KI Series
250VA -2000VA

Studer AJ Series
275VA - 2400VA / 12V, 24V or 48V

SMA Sunny Island Series
2KW - 5KW

SMA Windy Boy Series
2.5KW - 3KW for small wind turbines

OMNIPOWER TROLLEY 8
1500VA portable backup
Acts like a back-up system

Studer XP Compact, Compact and HP Compact Series
1400VA - 8000VA / 12V, 24V or 48V

Studer XTM and XTH Xtender Series
2000VA/12V - 8000VA/48V - Can be paralleled up to 3 units; available in three phase and also available for single phase to three phase conversion up to 72KVA

PROFESSIONAL PURE SINEWAVE WITH BUILT-IN CHARGER for Solar Use

Studer SI & HPSI 19" Series
600VA - 5000VA / 12V, 24V or 48V

OUTBACK FX Series turbo included
2000VA - 2300VA / 12V,24V or 48VDC

OUTBACK VX Series Vented/Bug proof
2600VA - 3000VA / 12V,24V or 48VDC

OUTBACK Peripherals : Hub / Mate / Mate 2 / Flexnet DC System monitoring devices

TELECOM Series
1250W - 72KW / 24V, 48V, 110V or 220VDC input modular

MINIFLEX Series
1KW - 6KW / 48V modular

TSI BRAVO & NOVA Series
740VA - 2500VA / 48V modular

GRID TIE INVERTERS

SMA Sunny Boy Series
1KW - 5KW

KACO POWADOR Series Grid Tie Inverters
1650W - 8000W

Print Version - all models (287kb)

• AVR design
• Auto temperature controlled fan - except HT-E-150
• Reverse polarity protection - if polarity is reversed the "crowbar circuit" will activate to protect the inverter from further damage
• Reverse polarity is not covered under the warranty
• Output short circuit protection - except HT-E-150
• Temperature protection : 50+ / -5 degrees
• Overload & input low voltage protection
• Low voltage alarm - except HT-E-150
• Low battery shutdown
• Input high voltage protection - except HT-E-150

Print Version - all models (287kb)

• AVR design
• Auto temperature controlled fan
• Reverse polarity protection - by fuse and diode
• Output short circuit protection/li>
• Temperature protection : 50+ / -5 degrees
• Overload & input low voltage protection
• Low battery alarm
• Low battery shutdown
• Input high voltage protection
• Remote control function (RS232)

Print Version - all models (263kb)

Sinewave with 10A built-in charger

This modified sinewave Inverter with a built-in battery charger is suitable for most loads and provides an economical way to get instant AC power anywhere and at anytime as long as a battery is handy.

The inverter converts a DC power source (e.g. from a car, truck, boat or standard battery; or solar panels) to 230 VAC power. The inverter range is specifically suitable for solar installations. High frequency PWM technology ensures a compact unit providing high reliability and performance.

The inverter has a robust design and is quiet. It can therefore be operated in almost any environment. The unit has a high current start up capability, protected against short circuit, reverse polarity and over load. The Inverter also incorporates a 3 stage PWM battery charger. If AC is present the built-in battery charger will recharge your lead acid or lead calcium battery within a few hours.

The system has a fast and seamless changeover switch and is therefore suitable for automated backup in certain applications.

• Silent Operation
• No Petrol or Diesel required
• Basically Maintenance free
• Very fast smooth automatic change over in <10mSec
• Inverter can start without power available
• Powerful Output 1500VA / 1000W continuous
• AC output via multi socket
• Resettable output circuit breaker
• Excellent output regulation
• Suitable for solar application with external regulator
• Excellent protection features
• LED status indicators
• 3 stage powerful fully automatic PWM battery charger

Specfications are being updated. Please phone us for further specs

This modified sinewave Inverter with a built-in battery charger is suitable for most loads and provides an economical way to get instant AC power anywhere and at anytime as long as a battery is handy.

The inverter converts a DC power source (e.g. from a car, truck, boat or standard battery; or solar panels) to 230 VAC power. The inverter range is specifically suitable for solar installations. High frequency PWM technology ensures a compact unit providing high reliability and performance.

The inverter has a robust design and is quiet. It can therefore be operated in almost any environment. The unit has a high current start up capability, protected against short circuit, reverse polarity and over load. The Inverter also incorporates a 3 stage PWM battery charger. If AC is present the built-in battery charger will recharge your lead acid or lead calcium battery within a few hours.

The system has a fast and seamless changeover switch and is therefore suitable for automated backup in certain applications.

The Power Trolley is a unique portable power back-up system designed for basically any situation when the power fails. Because the output of this unit is pure sinewave, therefore just about any type of load can be connected to the Power Trolley as long as it is within the power rating indicated.

This system can supply emergency power to businesses, shopping centres,offices, homes,weekend getaways and camping and, in contrast to a noisy generator, offers many fantastic features such as :

Click here to view full technical specifications (297kb)

Click here to view Operating Manual. NOTE : The manual is set out for double sided A5 printing and therefore the pages do not follow chronologically (631kb)

This inverter is suitable for most loads and provides an economical way to get instant AC power anywhere and at anytime as long as a battery is handy.

The inverter converts a DC power source (e.g. from a car, truck, boat or standard battery; or solar panels) to 230 VAC power. The inverter range is specifically suitable for solar installations. High frequency PWM technology ensures a compact unit providing high reliability and performance.

The inverter has a robust design and is quiet and portable. It can therefore be operated in almost any environment. The unit has a high current start up capability, protected against short circuit, reverse polarity and over load.

The system has a fast and seamless changeover switch and is therefore suitable for automated backup in certain applications.

Print Version - all models (592kb)

This modified sinewave Inverter with a built-in battery charger is suitable for most loads and provide an economical way to get instant AC power anywhere and at anytime as long as a battery is handy.

The inverter converts a DC power source (e.g. from a car, truck, boat or standard battery; or solar panels) to 230 VAC power. The inverter range is specifically suitable for solar installations. High frequency PWM technology ensures a compact unit providing high reliability and performance.

The inverter has a robust design and is quiet and portable. It can therefore be operated in almost any environment. The unit has a high current start up capability, protected against short circuit, reverse polarity and over load. The Inverter also incorporates a 3 stage PWM battery charger. If AC is present the built-in battery charger will recharge your lead acid or lead calcium battery within a few hours.

600W in 12V or 24V

1000W in 12V or 24V

1800W in 12V or 24V

2500W in 12V or 24V

Outback VX Series - Sinewave with built-in 3-way charger, vented & bug proof

The OutBack true sinewave inverter/charger is a complete power solution. It incorporates a DC to AC true sinewave inverter, battery charger and AC transfer switch all housed within a die-cast aluminum chassis. “Smart” multistage battery charging means less generator “on” time, and extends the life of your batteries. Outback’s modular system architecture permits flexibility allowing small systems the ability to increase the power output as the demand grows from 2 to 30kW - even in 3-phase configurations. Non-volatile memory retains all programming information even when the inverter isn’t on.

Our FX series uses a sealed chassis that can operate in the harshest environmental conditions such as high humidity and corrosive salt air - excellent for coastal and marine installations.

The VFX series uses a vented chassis with “bug proof” screened openings that allow higher AC output power. OutBack Power inverter/chargers are the best choice when you need a true sinewave, powerful, modular and reliable power solution for your home, business, telecom or mobile application.

FX Series Inverter

VFX Series Vented & Bug Proof Inverter with protection cover off

Click here for more information on the MX60/80 MPPT Controller

Click here for more information on the Flexnet DC System

The AJ series consists of pure sine wave inverters that converts the battery voltage to AC voltage for all AC devices.

The AJ series offers:

• range from 275 to 2400VA (P30)
• high and steady efficiency
• an outstanding overload capacity, thanks to the combined use of a toroidal transformer and a MOS power stage
• a digital regulation and microprocessor controlled
• an electrical supply to any kind of electrical device
• a complete internal protection of the inverter (overload, overheat, short-circuit, reverse polarity)
• an adjustable stand-by level on a large range and from a very low level (optional for AJ 275-12, 350-24 and 400-48)
• All the AJs in 12 and 24 V are certified according to the norm ECE-R 10 (E24)

AJ2100-12
AJ2400-24 (73.3kb)

HPC Compact : 2800VA/12V, 4400VA/24V, 6000VA/48V, 8000VA/48V

The series consists of fully automatic pure sine wave inverters/battery chargers/ transfer systems.

• the inverter converts the battery voltage to AC voltage for all electrical devices
• the high power charger supplies charge current to the battery
• the automatic transfer system manages the available power

• a high and steady efficiency
• an outstanding overload capability, thanks to the combined use of a toroidal transformer
• oversized MOS power stage
• an ultra-fast regulation and microprocessor controlled
• an electrical supply to any kind of device
• a fast transfer relay with following powers 30A/6,9kVA (50A/11,5kVA for the HPC 8000-48)
• a 4 STAGE (I/U/Uo/equalizing) battery charger with Power Factor Correction
• a complete internal protection of the HP COMPACT (overload, overheat, short-circuit)
• an stand-by level adjustable on a large range and from a low threshold on no noise thanks to HF-switching > 20 kHz

Can be paralleled up to 3 units; available in three phase and also available in single phase to three phase conversion

Studer sinewave inverter with built-in battery charger and automatic changeover switch.

Click here to view the brochure (50kb)
XTM SERIES :
2000VA/12V
3500VA/24V
4000VA/48V

XTH SERIES :
3000VA/12V
5000VA/24V
6000VA/48V
8000VA/48V

The XTM and XTH series consist of fully automatic pure sine wave inverters/battery chargers/ transfer systems; and can be paralleled up to 3 units for single phase applications and can have 3 x three units, up to 72KVA, for three phase applications.

• the inverter converts the battery voltage to AC voltage for all electrical devices
• the high power charger supplies charge current to the battery
• the transfer system automatically transfers the available power wherever needed

THE XTM and XTH SERIES are high-tech devices that will play a central role in energy saving for your electrical installation. The Xtender has been designed to work as an inverter / charger with advanced functions, which can be used in a completely modular way and guarantee the faultless functioning of your energy system. When the Xtender is connected to a generator or network, the latter directly supplies the consumers, and the Xtender works like a battery charger and backup device if necessary. The powerful battery charger has an exceptional high efficiency and power factor correction (PFC) close to 1.

The system guarantees excellent battery charging in all situations. The charge profile is freely configurable according to the type of battery used or the method of usage. The charge voltage is corrected depending on the temperature, thanks to the optional external sensor. The power of the charger is modulated in real time dependent according to the demand of the equipment connected at the Xtender output and the power of the energy source (network or generator). It can even temporarily backup the source if the consumer demand exceeds the source capacity.

The Xtender continuously monitors the source to which it is connected (network or generator) and disconnects itself immediately if the source is missing, disturbed or does not correspond to the quality criteria (voltage, frequency, etc.). It will then function in independent mode, thanks to the integrated inverter. This inverter, which has an extremely robust design, benefits from STUDER Innotec’s many years of experience and expertise in this area. It could supply any type of load without faults, enjoying reserves of additional power that is unmatched on the market.

All your equipment will be perfectly provided with energy and protected from power outages in systems where energy supply is unpredictable (unreliable network) or voluntarily limited or interrupted, such as hybrid installations on remote sites or mobile installations.

The parallel and/or three-phase network operation of the Xtender offers modularity and flexibility and enables optimum adaptation of your system to your energy requirements.

The RCC-02/03 control, display and programming centre (optional) enables optimum configuration of the system and guarantees the operator continuous control for all important configurations in the installation.

Fully extended backup setup

XTM SERIES

XTH SERIES

Remote

Temperature Sensor

XTH Xtender
Installation & Operation Manual
PDF Version (603kb)
XTH 3000-12
XTH 5000-24
XTH 6000-48
XTH 8000-48

XTH Xtender User Manual
(1.3 Mb - note this is a large file due to the drawings)
XTH 3000-12
XTH 5000-24
XTH 6000-48
XTH 8000-48

Xtender Range		Inverter		Charger	Transfer
	Batt. volt.	Power P30/Pnom	Power Smart-Boost	Charge current	Transfer Switch
XTM 2000-12	12V	2000VA/1600VA	2000VA	85A	50A/11.5kVA
XTM 3500-24	24V	3500VA/3000VA	3500VA	75A	50A/11.5kVA
XTM 4000-48	48V	4000VA/3000VA	4000VA	65A	50A/11.5kVA
XTH 3000-12	12V	3000VA/2500VA	3000VA	160A	50A/11.5kVA
XTH 5000-24	24V	5000VA/4500VA	5000VA	140A	50A/11.5kVA
XTH 6000-48	48V	6000VA/5000VA	6000VA	100A	50A/11.5kVA
XTH 8000-48	48V	8000VA/7000VA	8000VA	120A	50A/11.5kVA

TYPICAL PRE-WIRED 3-PHASE INSTALLATION

The SI series consists of "high end" pure sine wave inverters for AC voltage systems, and even allows a real 3-phased grid to be created with 3 SI, from the 1200W unit. You can use the SI for any AC system in 230Vac (also in 115Vac/60Hz on request, up to 2300W).

The SI series offers:

• a high and steady efficiency
• an outstanding overload capability, thanks to the combined use of a toroidal transformer and a MOS power stage
• an ultra-fast regulation
• an electrical supply to any kind of device
• a complete internal protection of the SI (overload, overheat, short-circuit, reverse polarity)
• an stand-by level adjustable on a large range and from a low threshold on
• no noise thanks to HF-switching > 20 kHz
• the possibility to assemble 3 inverters (min. SI 1200) in a 3-phased 3 x 400V stand-alone grid
• an optional solar charge controller for solar powered systems (only with SI 600 and SI 800).

HPSI Series :

A 19" rack range available from 600W to 5000W

Option TWINPOWER: From 1200W there is a choice between a stand-by (load detection adjustable from 0,3 to 20W) and the unique TWINPOWER option.

The TWINPOWER option allows the permanent use of very small loads (like security and alarm systems), with an outstanding efficiency 10 times higher than any other inverter less than 0,5W.

SI Series (382kb)

In the Sunny Island System, electricity generators and consumers are integrated in equal measure. PV and wind energy systems, diesel devices, water or block heating power stations can be coupled on the AC side just as conventional 230 Volt consumers.

Thus the Sunny Islands offer you two decisive advantages: at system planning and layout you can enjoy the highest degree of flexibility, during installation the complex DC cabling is not required.

SMA WINDY BOY for small wind turbines : The grid-coupling of small wind energy plants is simpler than ever - with the Windy Boy from SMA. It converts the variable frequency voltage from wind generators into grid conforming AC voltage. Thus the energy can be used privately, excess energy fed into the mains grid and respectively remunerated. The Windy Boy works perfectly together with the Sunny Island in stand-alone grids for the electrification of remote areas. The Windy Boys are suitable for wind generators from a wide variety of manufacturers and power classes. They guarantee an optimal power adjustment and very high energy yields. They are also best suited for flexible and worldwide use - ensured by the robust housing, the SMA Grid Guard disconnection device, the electric separation to the grid along with an automatic 50 or 60 Hz recognition

Sunny Island Catalgoue (1.2MB)

Sunny Boy Catalgoue (1.84MB)

Windy Boy Catalgoue (4.11MB)

The Farmer 36V sinewave inverter was designed and produced to replace the thousands of 36VDC old design farmer inverters that are still in use in southern Africa. The inverter is designed in modern high frequency PWM technology to achieve a robust and solid product. The design also caters for very harsh environments and also has a very high inrush current capability (approx. 15KW for 5 secs.). This makes this inverter specifically suitable for farming tools such as angle grinders, welding machines, drilling machines, water pumps, etc. The inverter can be used in conjunction with your existing battery set and is easily exchangeable.

Omnipower 5036 : 5KVA /36V

Standard PWM Sinewave Inverters : for solar "island" installations

• KI 250 - 250VA
• KI 1000 - 1000VA
• KI 2000 - 2000VA
• KIC 2000 - 2000VA
• KIC 2000 - 2000VA with integrated charge controller

Powador Isolated Parallel Grid Inverters
with integrated MPP Controller and isolation transformer

• Powador 1501xi
• Powador 3501xi
• Powador 4501xi

POWADOR NON ISOLATED PARALLEL GRID INVERTERS
with integrated string fuses and DC Disconnector plus MPP Controller

• Powador 2500xi
• Powador 3500xi
• Powador 4000xi
• Powador 4500xi
• Powador 5000xi
• Powador 6400xi
• Powador 7200xi
• Powador 8000xi

POWADOR NON ISOLATED PARALLEL GRID INVERTERS
with integrated string fuses and DC Disconnector plus MPP Controller

• Powador 2500xi
• Powador 3000xi
• Powador 3300xi

KI250 / KI1000 / KI2000

Powador 1501xi

Not currently available

The Telecom Series are 100% digital inverters which provide AC current to utilities by taking power from DC sources eg. batteries, fuel cells, solar panel arrays etc. With a full range of options from small stand alone applications to large data centre systems we can provide almost any inverter solution required for today's demanding markets. 16/18 modules can be paralleled for large power demands. Optional full range of static switches available. (32amps - 180amps) and many other features.

The TSI is designed according to the golden rules of True Redundant Systems. One of the most important features is the disconnection capability. A TSI converter has at least 3 disconnecting levels in series (i.e. a relay, a fuse...) on each power port as well as an optical isolation on the double communication bus. The AC grid port is specifically designed to clean up the surges, bursts and all of the well-known disturbances met on a power network. As designed, the AC grid input has four (4) disconnecting devices in series in order to insure a higher MTBF of the DC/AC converter inside the TSI. The AC-to-AC conversion chain isolates the AC output from the AC input and features a double filtering function. Consequently, the voltage supplied to the critical load is a pure sine despite all the disturbances (harmonics, surges, glitches …) usually carried by the grid and the input current remains sinusoidal even when the load is not linear.

TSI Bravo

TSI Nova

TSI Bravo (208kb)

TSI Bravo EPC Pack (682kb)

TSI Nova (207kb)

TSI Nova EPC Pack (558kb)

This inverter has been designed to offer low cost per VA and offers the standard features. High local level of intelligence, reliability and smart characteristics. Module is very compact : 1U height and it can be integrated in 400mm deep cabinets.