UPS Systems Sales Repairs by SINETECH

MR / MRD SERIES
True Online Double Conversion Sinewave
Suitable for industrial applications & extreme conditions

600 / 1000 / 1500 / 2000VA

The exceptional MR / MRD Series delivers the most comprehensive uninterruptible power protection on the marketplace.

These models are recognised worldwide by users for their true on-line double conversion topology, highly efficient operation, true isolation, near unity input power factor and superior output voltage regulation.

The MR / MRD Series features a wide input mains voltage range virtually eliminating unnecessary battery discharges ensuring that the batteries are reserved for true emergency conditions. The input mains voltage range for the MR / MRD Series is between 90-130VAC for 120VAC models and 160-270VAC for 230VAC models.

True On-Line (true double conversion, true sinewave) - no-break protection for critical applications
Double Conversion and Pure Sinewave Output - the cleanest, most compatible AC output for computer systems
50KHz High Frequency Operation - compact size, lighter weight for decreased shipping costs
Near Unity Input Power Factor (>0.95) - saving input current by 1/3
Superior Output Voltage Regulation - eliminates unnecessary battery discharges for violent voltage fluctuations
Dual Full Bridge Inverter and Complete Isolation - more durable and higher reliability
High Efficiency (>80%) - more efficient and energy saving
UPS Monitoring, Shutdown Software and SNMP Solutions - available for most operating systems and Novell environments.

TECHNICAL SPECIFICATIONS

MODEL
LED DISPLAY
MR600

MR1000

MR1500

MR2000

MR611

MR1011

LCD DISPLAY
MRD600

MRD1000

MRD1500

MRD2000

MRD611

MRD1011

Output

VA Rating

600 VA

1000 VA

1500 VA

2000 VA

600 VA

1000 VA

Wattage

420 W

800 W

1050 W

1400 W

420 W

700 W

Current (Max)

2.7 A

4.3 A

6.5 A

8.7 A

5.2 A

8.7 A

Voltage

220 V, 230 V, 240 V ± 2%

100 V, 110 V, 120 V ± 2%

Frequency

50 / 60 Hz

60 Hz

Waveform

Pure Sinewave

Harmonic Distortion

Less than 3% at full linear load

Input

Voltage

160 V - 270 V

90 V - 130 V

Frequency

50 / 60 Hz ± 5%

60 Hz ± 5%

Runtime

Full Load

8 min.

10 min.

10 min.

10 min.

8 min.

10 min.

Half Load

25 min.

Transfer Time

UPS to Bypass

Less than 4 msec.

Zero-Cross Trans.

0 msec. to or from battery

Battery

Type

12V / 7AH Lead acid maintenance free

DC Voltage

24 VDC

48 VDC

72 VDC

96 VDC

24 VDC

48 VDC

Recharge Time

5 - 8 hours

Recharge Current

1.5 A

Efficiency

AC to AC

80% min.

Audible Noise

< 45 dBA at one metre

Indicators

LED Display

LINE, INV., BYPASS, FAULT, LOAD LEVEL and BAT. LEVEL

Audible Alarm

Battery Discharge

Sounding every 6 seconds after mains fail and every second when approaching final discharge

Alarm Reset

Press once to stop alarm at back-up mode

Fault

Continuous beeping sound

Auto Restart

When AC line recovers after shutdown by remote LAN signal or end of battery discharge

DC Start-up

Yes

Protection

Overload

> 110% of full load with 20 sec. delay

Over/Under Volt. at INV.O/P

Inverter shutdown protection

Short Circuit

The UPS shuts down and will not transfer to the bypass mode when a short circuit occurs on the output of the unit. After the short circuit is removed, the UPS will operate normally again. At short condition, the FAULT LED lights as a warning to end-users (600VA excluded).

Lightning & Surge

Passes ANSI/IEEE587 Cat.A

EMC/LVD1230V 50Hz

EN50091-2/EN50081-1

Safety

TUV GS Mark EN50082-1

LAN Interface

DB9/RS232 Interface

Mains fail, battery low and remote shutdown UPS

Mechanical

Dimensions (W x H x D) (cm)

14 x 19 x 44

18 x 30 x 40

18 x 30 x 47

18 x 32 x 49

14 x 19 x 44

18 x 30 x 40

Weight (kg)

12

22

30

38

12

22

Environment

Temperature

0 deg - 40 deg C

Humidity

0 - 95% Non-Condensing

	True Online Double Conversion Pure Sinewave UPS Systems
	Home \| Products \| Email \| Contact Details \| Profile \| Lightning Information Tel: (++27) 11 886-7874 Fax : (++27) 11 787-0178

MODEL	LED DISPLAY	MR600	MR1000	MR1500	MR2000	MR611	MR1011
	LCD DISPLAY	MRD600	MRD1000	MRD1500	MRD2000	MRD611	MRD1011
Output	VA Rating	600 VA	1000 VA	1500 VA	2000 VA	600 VA	1000 VA
	Wattage	420 W	800 W	1050 W	1400 W	420 W	700 W
	Current (Max)	2.7 A	4.3 A	6.5 A	8.7 A	5.2 A	8.7 A
	Voltage	220 V, 230 V, 240 V ± 2%				100 V, 110 V, 120 V ± 2%
	Frequency	50 / 60 Hz				60 Hz
	Waveform	Pure Sinewave
	Harmonic Distortion	Less than 3% at full linear load
Input	Voltage	160 V - 270 V				90 V - 130 V
	Frequency	50 / 60 Hz ± 5%				60 Hz ± 5%
Runtime	Full Load	8 min.	10 min.	10 min.	10 min.	8 min.	10 min.
	Half Load	25 min.
Transfer Time	UPS to Bypass	Less than 4 msec.
	Zero-Cross Trans.	0 msec. to or from battery
Battery	Type	12V / 7AH Lead acid maintenance free
	DC Voltage	24 VDC	48 VDC	72 VDC	96 VDC	24 VDC	48 VDC
	Recharge Time	5 - 8 hours
	Recharge Current	1.5 A
Efficiency	AC to AC	80% min.
Audible Noise		< 45 dBA at one metre
Indicators	LED Display	LINE, INV., BYPASS, FAULT, LOAD LEVEL and BAT. LEVEL
Audible Alarm	Battery Discharge	Sounding every 6 seconds after mains fail and every second when approaching final discharge
	Alarm Reset	Press once to stop alarm at back-up mode
	Fault	Continuous beeping sound
Auto Restart		When AC line recovers after shutdown by remote LAN signal or end of battery discharge
DC Start-up		Yes
Protection	Overload	> 110% of full load with 20 sec. delay
	Over/Under Volt. at INV.O/P	Inverter shutdown protection
	Short Circuit	The UPS shuts down and will not transfer to the bypass mode when a short circuit occurs on the output of the unit. After the short circuit is removed, the UPS will operate normally again. At short condition, the FAULT LED lights as a warning to end-users (600VA excluded).
	Lightning & Surge	Passes ANSI/IEEE587 Cat.A
	EMC/LVD1230V 50Hz	EN50091-2/EN50081-1
	Safety	TUV GS Mark EN50082-1
LAN Interface	DB9/RS232 Interface	Mains fail, battery low and remote shutdown UPS
Mechanical	Dimensions (W x H x D) (cm)	14 x 19 x 44	18 x 30 x 40	18 x 30 x 47	18 x 32 x 49	14 x 19 x 44	18 x 30 x 40
	Weight (kg)	12	22	30	38	12	22
Environment	Temperature	0 deg - 40 deg C
	Humidity	0 - 95% Non-Condensing