19" Rack Mount Modular Telecom Inverters

Model SYS3000 Controller

SYS3000 controller for door mounting on cabinet

The SYS3000 Controller is a Supervisor panel providing immediate information of the system or individual inverters locally at site or remotely with our PSM software anywhere in the world. All parameters can be viewed, and modified locally and remotely again without having to gain access into the main components of the system, making maintenance and support simple and ultimately safe.100% digital control makes the SYS-3000 a valuable tool for any engineer or network manager requiring up to the minute information. If you do not need remote control then just connect to the RS232 port and down load the system information straight onto your laptop or PC or for BMS alarms we provide Volt free contacts as standard.

Key Features :

Full Local and remote supervision, control and parameter modifications
Group configuration
Multi-group configuration
Individual inverter interrogation
RS232 connector
Twin LCD displays
Easy to use keypad
BMS alarm contacts
Programmable "urgent/non-urgent alarms"
Safe and easy to use
Ultimate power security - disconnect the SYS-3000 and it does not effect the inverter system

No controllers are required in our 100% digital Inverter system.

SYS 3000 Controller

General features

High efficiency
Very high MTBF· Fully Microprocessor Controlled
Outstanding response time
Input/Output RFI meet International Standards
Complete Supervision possibility
On Line or Off Line Configurable
Large Synchronisation Range
Alphanumeric Display

With no single point failure, as with many with many older technology Inverters, making these one of the most reliable inverter solutions in the world.

TECHNICAL SPECIFICATIONS

Power supply 18 up to 150 VDC

System voltage measurement accuracy 0.5 %

Maximum output current of the system 210A under 230V for 48 KVA

Current measurement accuracy 2 %

Alarms & threshold protection programmable Yes

Programmatic language C and assembler

SYS 3000 and watchdog reliability In case of controller fault, the inverter system will continue to fun with the setting intrinsic values

Permissible ambient temperature 0 to 50 deg. C

Overall dimensions W 235 x H 265 x D 45 mm

Dimensios of apparent fron W 220 x H 205 mm

Weight 1.4 kg

DC voltage source(s) measurement accuracy + / - 1V (in relation to load)

CONNECTIONS

To the RDI bus Through RJ 45 connector

To the DC bus Through 26 pins connector

To digital input Through 16 pins arranged in :
2 pins for AC distribution
2 pins for DC fuses
5 x 2 pins for auxiliary inputs

To free potential contact outputs Through 12 pins arranged in :
4 x 3 pins with 4 change over contacts
(UA, NUA, Aux 1, Aux 2)

To RS232 or 485 output for PC or modem On DB 9 or RJ 45 connector

USER INTERFACE

2 LCD displays Display 1 2 lines of 16 characters to display permanently physical values (U, I, P, ….) of the system

2 LCD displays Display 1 4 lines of 20 characters to display menu, parameters, individual data, …

2 Display of Usys, Isys, measurements 3 digits + 1 decimal

Display of frequency measurement 2 digits + 1 decimal

Display of power measurement in KW with 1 decimal for the system
In @ without decimal for the modules

Display of local alarms 6 LEDs

Keyboard 16 Keys

Parameters and configuration Through opposite menus or PSM 2000 software

Languages English or French through menu (other languages on request)

Sinetech reserves the right to change specifications without prior notice

Home | Full Product List | EMail | Our Contact Details

	Modular 19"Rack Mount Telecom Sinewave Inverters
	Home \| Products \| Email \| Contact Details \| Profile \| Lightning Information Tel: (++27) 11 886-7874 Fax : (++27) 11 787-0178

Power supply	18 up to 150 VDC
System voltage measurement accuracy	0.5 %
Maximum output current of the system	210A under 230V for 48 KVA
Current measurement accuracy	2 %
Alarms & threshold protection programmable	Yes
Programmatic language	C and assembler
SYS 3000 and watchdog reliability	In case of controller fault, the inverter system will continue to fun with the setting intrinsic values
Permissible ambient temperature	0 to 50 deg. C
Overall dimensions	W 235 x H 265 x D 45 mm
Dimensios of apparent fron	W 220 x H 205 mm
Weight	1.4 kg
DC voltage source(s) measurement accuracy	+ / - 1V (in relation to load)
CONNECTIONS
To the RDI bus	Through RJ 45 connector
To the DC bus	Through 26 pins connector
To digital input	Through 16 pins arranged in : 2 pins for AC distribution 2 pins for DC fuses 5 x 2 pins for auxiliary inputs
To free potential contact outputs	Through 12 pins arranged in : 4 x 3 pins with 4 change over contacts (UA, NUA, Aux 1, Aux 2)
To RS232 or 485 output for PC or modem	On DB 9 or RJ 45 connector
USER INTERFACE
2 LCD displays Display 1	2 lines of 16 characters to display permanently physical values (U, I, P, ….) of the system
2 LCD displays Display 1	4 lines of 20 characters to display menu, parameters, individual data, …
2 Display of Usys, Isys, measurements	3 digits + 1 decimal
Display of frequency measurement	2 digits + 1 decimal
Display of power measurement	in KW with 1 decimal for the system In @ without decimal for the modules
Display of local alarms	6 LEDs
Keyboard	16 Keys
Parameters and configuration	Through opposite menus or PSM 2000 software
Languages	English or French through menu (other languages on request)